|
Suparsarfeis and highest class HR quartz
insulator
ＯＰＴ−１００ＨＧ−ＳＳ ＨＲ／（１Ｐ・３Ｐ・４Ｐ） ＯＰＴ−１００ＨＧ−ＦＬＡＴ−ＳＳ ＨＲ／（１Ｐ・３Ｐ・４Ｐ）
The material of the highest grade is used
in the HR quartz. The super-high purity quartz
material is formed with beginning cut down
and a molecular density is improved. The
surface of the material of ..high very response
very few of the distortion.. Mot was achieved
and "Suparsarfeis" was achieved
by the super-highly accurate grinding. Grinding
such as expensive optical lenses of one million
yen the number of sheets is done to "Suparsarfeis"
processing though an innumerable ruggedness
can be done on the surface, and there is
an adverse effect in the overtone construction
usually by the manufacturing method of deliberately
multiplying, polishing, and raising time
very costs though the transparent one is
done by a cheap thermal processing. A very
advantageous "Suparsarfeis" for
the overtone element plays the sound of the
ideal that exceeds the current insulator
concept. "Suparsarfeis" that reacts
to the overtone said to several times a usual
surface treatment.
The price is an unredeemable price from the
model so far. Moreover, the SS-HR quartz
insulator of the highest class : to the one
of the reality because it prepared an affordable
set of one set that consists of three units
and 4 piece set.
〔Common specification〕
■Material: High HR physical properties processing
response super-high purity fused silica
■finish: Suparsarfeis (specular grinding
finish)
■resonance frequency: Withstand load outside
Caki band (no color ration):
■Specific gravity of 9500kg/cm3: 2.2g/cm3
(2.5-3.0 crystal diamonds 3.52) hardness:
7.0 (5.0 crystal diamonds 10)
New material and high purity of high response quartz insulator
Reasonable type SG-4 series becomes HR quartz
& size-up and it debuts in the price
unredeemable.
Quartz insulator SG-4 series that is under
10,000 yen is newly made HR quartz, and the
size-up. As for the HR quartz, the energy
balance is greatly different from usual quartz.
A flat balance from a super-low region to
a super-high region of the overtone. It became
audio with the material of the ideal in there
was no peculiar distortion at all.
Moreover, it is assumed to 10mm in height
Φ12, and the audio beginner is pleased with
externals and the sound with the stabilities.
Finish preeminent also for mania to admit.
The sound that there is width in the response
is the throb feeling, and is a super-wide
cooking stove in addition. The sound stage
of the ideal comes to the surface by this
like the depth feeling etc. one before and
after the location.
Please note analogous articles such as crystal
(quartzes) and crystal glasses of the other
companies.
〔Specification〕
Material: HR physical properties processing,
high response, and high purity fused silica(HG
is super-high purity. )
Resonance frequency: Outside Caki band
Withstand load: 9500kg/cm2
Specific gravity: 2.2g/cm3(crystal: 2.5-3.0
diamonds: 3.52)
Hardness: 7.0(crystal: 5.0 diamonds: 10.0)
SG-4HR/3P (3 pieces a couple)
SG-4HR/4P (4 pieces a couple)
Release date: February 20, 2005
Spike base insulator for efficient vibration
processing carpet
| One vibration processing is solved. Staggering
of the carpet is completely excluded and
it direct and mechanical grounds it. "You should be strongly steady of the floor" is very natural in the audio industry. The insulator is paved directly on the carpet when "Carpet and carpet" that it uses an awful lot while living was paved on the floor, and the audio board is paved, and however, staggering that taking is peculiar to "Carpet" of all , is caused, and vagueness remains even a sound in fluffy and the sound image. Moreover, a favorite insulator and the audio board cannot be used though the influence of the carpet is disturbed by setting up the spike directly from the carpet. Then, if our "Spike Sinshuratar" is used, the use of the audio board and the insulator becomes possible without the influence of the carpet. With the height of the vibration processing performance of support three points a piece, because basic the main body uses the aluminum alloy of 7075 rigidity of ..high hardness.. Cou aircraft very much, an accurate tone is achieved by a very high rigidity. 〔specification〕 material: method of forming the aluminum alloy and high hardness stainless steel spike chip & screw for 7075 high rigidity physical properties processing aircraft Formation method: Beginning CNC cutting down specification: ULTRA SZ physical properties processing size: Φ55mm×9mm(19mm including the spike part. ) Please acknowledge being likely being likely to change without a previous notice for the improvement beforehand. ＳＰＬ−３０５０／３Ｐ ＳＰＬ−３０５０／４Ｐ |
HG.HR SERIES:
THE WORLD'S FIRST SOLID QUARTZ SPIKE.
|
SUPER PURITY |
φ30×18mm |
Super High Purity High-response Solid Quartz
Spike has beenDeveloped.
With a highest technology, we curved a high-response solidquarts to a spike-shape, and besides, This is the most difficult job among curving technology, andWe are proud of this highest technology in the world.R1 process is arranged at the tip of a spike for a smooth contact to the Spike receptacle, and a ringing at the contact point was cancelled. For fixing the spike to an equipment, |
φ30×20mm highest quality model has been
released in HG series.
OPT-30HG 20HR
|
SUPER PURITY |
φ30×20mm |
φ30×20mm highest quality model has been
released in HG series.
30x20mm type was released in Super High Purity High-response Solid Quartz series.A height was increased to 20mm from 10mm height of OPT30HG series, and the vibration-canceller power was improved.By increasing a height and Mass, a capability to cancel vibration energy is remarkably improved.A super high S/N ratio, a sound of full reality, smooth and openly,and worm as well…… no words to express it.This is the world's first insulator which can display 100% ability ofequipments.Please do not mix up with other similar-looking products made bya quartz, crystal glass, etc. |
30x10mm
Spike Receptacle has been released inHG series !!
OPT-30HG HR OPT-30HG-PL HR 例：WilsonAudio System7
|
SUPER PURITY |
φ30×10mm |
A spike receptacle for 30x10mm type was released
in Super High Purity High-response Solid
Quartz series !! Thanks to our superior curving technology, we realized aa very reasonable priced Spike receptacle with the highest grade HG quartz HR which highly affects to the sound quality by its high speed vibration canceling power.An accurate conical curving and further R1 process at acontact point will improve the sound quality much more.The frequent request from the customers has been now realized. You can display a full capability of your equipments and can create a very accurate sound stage in front of you. |
HG series high purity high-response quartz
insulators
Are available at a reasonable price.
| High purity High-response quartz…our original
characteristic, has aVery high "molecular
joint power(分子結合力)" comparing to
any other materials, and due to thisCharacteristic,
it does not make any distortions not only
in a hearing area of the frequency (20-20000
Hz), but also in a super low and super high
frequency.Most of other brand insulators
are not canceling vibrations, but justChanging
a colour of sound by a distortion of its
material. 7 years long best seller OPT series has done a further evolution with a new material HR quartz.A quartz crystal is the ultimate material for anti-vibration, and we further made a special treatment on it to improve this material to High-end audio grade, which is so called "High-Response Super High Purity Quartz Crystal" (HR Quartz).This new material can create a quite unexampled and matchless sound quality, a reality of a sound stage and an extreme high S/N ratio.As HG series has a higher speed of response than previous series, there is a remarkable improvement in super low frequency, smoothness of sound.Besides, clearness, S/N ratio and a resolution power have been extremely improved and you will be able to arrange an ultimate sound tuning forYour satisfaction. |
 |
■MATERIAL:H.R. Treatment High-response High-purity
Quartz Crystal (HG …Super High Purity) ■Resonance frequency:Outside band ■Max acceptable weight:9500kg/cm3 ■Relative Density: 2.2g/cm3 ※SG-4 doesn't give the HR processing. |
|
OPT HR series
OPT-1S HR/3P OPT-1S HR/4P OPT-1S HR/8P |
φ20×10mm
|
|
OPT HR series
OPT-1 HR/3P OPT-1 HR/4P OPT-1 HR/8P |
φ20×20mm
|
|
SUPER PURITY |
φ50×10mm φ50×20mm φ30×10mm φ30×10mm spike receptacle |
|
SG-4 series
SG-4/3P SG-4/4P |
φ10×10mm
|
| A NEW MATERIAL "ULTRA HIGH-MOLECULE POLYMER" |
| By arranging HR treatment on a New material "Ultra High-Molecule Polymer" , we succeeded to speed-up a response.We developed this new material as one of the most ideal materials for audio insulator, because this material has a reasonable viscosity to absorb and spread unnecessary frequency vibrations.With this insulator, the sound will be more wide-range, low-distortion and dynamic.This insulator is effective not only for speakers, but also for all audio components such as CD players, Amplifiers, Turntables, etc.You also can use this insulator in combination with our AGFQ(Quartz) insulators for more wide-ranged sound tuning. |
 |
［HRI-5005 ］
Material: Solid high molecule Polymer with HR treatmenr.Max acceptable weight:70 Kg. |